Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
Ruled Rigger Decal
$0.50
SKU: 04P54
Category: Carbon Riggers
Tags: carbon, decal, Dreher, measurement, rigger, ruler, sticker, tube rigger
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Related Products
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Decals for Sweeps
Decals for Sweep Oars: Handle Decal (363 cm – 383 cm, 143″ – 151″) Sleeve Decal (250 cm – 268 cm, 98″ – 105″) Dreher Reflective Decal
Thick Split Oar Lock Adjustment Spacers
Thick Split Oar Lock Adjustment Spacers: Make quick height changes with split oarlock spacers. Sized for 13 mm pins. Sold in packs of ten. These spacers can come in red, black or blue. We cannot predict what color we have in … Read more
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Slotted Interface for Carbon Tubular Rigger
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more