Description
Back Stay Only:
Backstay Only
$85.50
You may also like…
Carbon Side Mounted Sweep Rigger
Carbon Side Mounted Sweep Rigger: With pins, without locks, without shims, unassembled, uncut to the exact dimensions. Price provided per each rigger. If the boat is present, we can quote on complete assembly to your rigging specification at $75.00/hour labor … Read more
FISA Carbon Single
FISA Carbon Single: With Dreher carbon riggers, seats, foot stretchers. Presently out of stock on new FISA 1xs. **PLEASE DO NOT ORDER ONLINE** CALL FOR PRICE – New Racing Shells Are Not Sold on-line. We need your rigging specs and … Read more
Sidestay Assembly
Sidestay Assembly for Rigger: Rigger Connector (RC-7), Sidestay Tube & Boat Attachment Piece (BAP). All carbon components. See the Rigger Link in the shopping area.
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Sold as a pair. Included is the oarlock pins and the rigger components. The rigger components are uncut and unassembled. No boat shims are included. If the racing shell is brought to our shop and … Read more
Related Products
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher
Heel Tie-Down Quick Release Snaps
Heel Tie-Down Quick Release Snaps: Hooks onto shoe heel loops to provide a quick entry and release of heel tie-downs attached to the bottom of foot stretchers. Sold in packs of 4.
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and a pin with zero degree outboard pitch.
Bent Arm Tubular Rigger Part
Bent Arm Tubular Rigger Part: The part attaches to the back stay connector and the bent arm is threaded and allows adjustable length and attached to the bow boat attachment point of each rigger. The part is black anodized for corrosion resistant. … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes complete with two seat supports, four wheels and two axles. Three seat support heights are available: low (1.8cm); medium (2.4cm); and high (3.4cm). The measurement is from the center of the axle to the … Read more
Hex Head Bolt
Hex Head Bolt: Sold in packs of 5. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Carbon Rigger C-Cup
Carbon Rigger C-Cup: C-Cup for Dreher Carbon Tubular Riggers (Top Mounted or Side Mounted): Oar lock, special pin and hardware are not included. See 04P51 /product/carbon-tubular-pin-with-and-without-hardware/ for the special pin for either carbon tubular rigger type.
Thick Split Oar Lock Adjustment Spacers:
Thick Split Oar Lock Adjustment Spacers: Make quick height changes with split oarlock spacers. Sized for 13 mm pins. Sold in packs of ten. These spacers can come in red, black or blue. We cannot predict what color we have in … Read more