Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
“Carbon Sidestay – Tube Only” has been added to your cart. View cart
Ruled Rigger Decal
$0.50
SKU: 04P54
Category: Carbon Riggers
Tags: carbon, decal, Dreher, measurement, rigger, ruler, sticker, tube rigger
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Related Products
Decals for Sweeps
Decals for Sweep Oars: Handle Decal (363 cm – 383 cm, 143″ – 151″) Sleeve Decal (250 cm – 268 cm, 98″ – 105″) Dreher Reflective Decal
Bent Arm Tubular Rigger Part
Bent Arm – Tubular Carbon Rigger Part: The Bent Arm is a black anodized threaded piece that inserts into the Delrin bushing of the backstay. The threading allows for length adjustments. The other end has two holes, offering a choice … Read more
Carbon Sidestay – Tube Only
Carbon Side-Stay Tube: Carbon sidestay for Dreher side mounted carbon tubular riggers. Priced per sidestay. Please provide length of tube.
Carbon Backstay – Tube Only
Carbon Back-Stay Tube: Carbon backstay for Dreher side mounted carbon tubular riggers. Priced per backstay. Please provide length of tube.
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Carbon Wing Rigger Boat Attachment Pieces
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger: Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more