Description
Carbon Pitch Meter:
For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
C-Cup Rigger Pitch Meter
$70.00
SKU: 08A26
Categories: Accessories & Merchandise, Carbon Riggers
Tags: carbon, carbon-tubular-rigger, pitch-meter, pitchmeter, side mounted, side rigger, top mounted, top rigger, tubular
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Carbon Side Mounted Sweep Rigger
Carbon Side Mounted Sweep Rigger: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components are uncut and unassembled. No boat shims are included. Price provided per rigger. The carbon “cup-shaped” oarlock … Read more
Related Products
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. Pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher
Hex Head Bolt
Hex Head Bolt: Sold in packs of 5. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Tank Sweep Oar
Carbon Tank Sweep Oar: For Dreher Tanks only. Requires the following information in the ‘Order Notes’ section of the Checkout page: Name of tank. Total length of the shaft. Distance from the blade tip to shaft/blade interface. Distance from the … Read more
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.