Carbon Rigger C-Cup Description
Carbon Pitch Meter:
For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
“Carbon Rigger C-Cup” has been added to your cart. View cart
C-Cup Rigger Pitch Meter
$70.00
Out of stock
SKU: 08A26
Categories: Accessories & Merchandise, Carbon Riggers
Tags: carbon, carbon-tubular-rigger, pitch-meter, pitchmeter, side mounted, side rigger, top mounted, top rigger, tubular
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Related Products
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Scull Handles
Priced per Handle.
Tank Sweep Oar
Carbon Tank Sweep Oar: For Dreher Indoor Rowing Tanks only. Requires the following information in the ‘Order Notes’ section of the Checkout page: Name of tank. Total length of the shaft. Distance from the blade tip to shaft/blade interface. Distance … Read more
Ruled Rigger Decal
Ruled Rigger Decal: Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
Slotted Interface for Carbon Tubular Rigger
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Oar Lock Adjustment Spacers
Thin Oar Lock Adjustment Spacers: Make height changes with thin oarlock spacers. Sized for 13 mm pins. Sold in packs of twenty.
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Scull Pin Assembly
Priced per Pin. Complete with Attachment Hardware and Height Spacers.