Sweep Pin Assembly Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
“Sweep Pin Assembly” has been added to your cart. View cart
Ruled Rigger Decal
$0.50
SKU: 04P54
Category: Carbon Riggers
Tags: carbon, decal, Dreher, measurement, rigger, ruler, sticker, tube rigger
You may also like…
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Related Products
Carbon Backstay – Tube Only
Carbon Back-Stay Tube: Carbon backstay for Dreher side mounted carbon tubular riggers. Priced per backstay. Please provide length of tube.
Scull Pin Assembly
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Carbon Rigger C-Cup
Carbon Rigger C-Cup: Dreher carbon “C” shaped oarlock holder, used with side mounted carbon tubular riggers. Oar lock, special pin and hardware are not included.
Dreher Black Seat Pad
Dreher Black Seat Pad: At only 1 oz. this is the lightest weight seat pad we offer. It is 1/3 inch in thickness and is the best value for the quality. This seat pad has a heat bonded fabric cover and can … Read more
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Carbon Wing Rigger Boat Attachment Pieces
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger: Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.