Description
C2 Scull Oarlocks:
Concept 2 scull locks with blue bushings for metric 13 mm pins.
Price per pair.
Scull Locks
$26.00
Priced per Pair. For 13mm Pins.
SKU: 04P61
Categories: Carbon Riggers, Hardware
Tags: concept 2, metric, pins, pitch-bushings, scull-locks
You may also like…
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Related Products
Shoe Tie-Down Laces
Shoe Tie-Down Laces: Required equipment as per USRowing’s Rules of Racing. If you flip a boat, you need to be able to pull your feet out of the shoes. The shoe heel needs to move for rowing, but have strong … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Carbon Fins For BBG 1xs and 2xs
Carbon Fins For BBG Singles and Doubles: Dreher Carbon Fins are designed to fit BBG singles and doubles. Available in two sizes (small and large) and two styles (the classic Parallelogram shape and the newer Sailboard shape).
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Rudders
Rudders: Martinoli Rudders for pairs, fours and eights.
Foot Stretcher Fittings
Foot Stretcher Fittings: The classic foot stretcher fittings made by Martinoli in Italy. Options available: Circle Wedge Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Tube End Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – … Read more
Drain Plugs
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Bow Ball
Bow Ball: Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.