Lock Nuts Description
Cylindrical Wing Nut:
From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place.
Sold individually.
Cylindrical Wing Nut
$5.60 – $7.10
You may also like…
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff and X-Stiff Twill Foot Stretcher: These models foot stretcher comes in three frame configurations (small, large 5-hole, large 7-hole), two-foot plate options (regular or angled) and two shoe plate widths (15 cm and 16 cm) and in the … Read more
F5 Foot Stretcher
F5 Foot Stretcher: Three-way adjustable. Available with or without foot plates. Compatible with BBGs, Resolutes, Dreher Rec-Racers and FISA 1xs. Not Included (click on hyperlinks below to purchase): Attachment fittings come in two styles (circle wedges and tube ends) and … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 and F5N (narrow) foot stretchers (See picture) Rectangular flat plate F4 stiff and x-stiff foot stretchers Rectangular angled plate F4 foot stretchers
Related Products
SRS Scull Sleeves
SRS Scull Sleeves: Schröder Rowing Service (SRS) Scull Sleeve used on Dreher Adjustable Length Sculls. This sleeve is bonded to the shaft with a epoxy based compound. To replace, simply remove the 10 screws and pry off. Leave the epoxy … Read more
Foot Stretcher Fittings
Foot Stretcher Fittings: The classic foot stretcher fittings made by Martinoli in Italy. Options available: Circle Wedge Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Tube End Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Seat Supports
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes complete with two seat supports, four wheels and two axles. Three seat support heights are available: low (1.8cm); medium (2.4cm); and high (3.4cm). The measurement is from the center of the axle to the … Read more
Black Plastic Locking Wing Nuts
Locking Wing Nuts: Black plastic locking wing nuts, metric size 6. Used to secure the foot stretcher in place. Optimal for travel. Sold in packs of 10. Please feel free to give us a call to discuss which attachment hardware … Read more
Lock Nuts
M6 Stainless Steel Lock Nuts. Sold in packs of 10.
Flat Washers
M6 Stainless Steel Flat Washers. Sold in packs of 10.