Description
M6 Stainless Steel Fender Washers.
Sold in packs of 10.
Fender Washers
$6.00
You may also like…
F5 Foot Stretcher
F5 Foot Stretcher: Three-way adjustable. Available with or without foot plates. Compatible with BBGs, Resolutes, Dreher Rec-Racers and FISA 1xs. Not Included (click on hyperlinks below to purchase): Attachment fittings come in two styles (circle wedges and tube ends) and … Read more
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff and X-Stiff Twill Foot Stretcher: These models foot stretcher comes in three frame configurations (small, large 5-hole, large 7-hole), two-foot plate options (regular or angled) and two shoe plate widths (15 cm and 16 cm) and in the … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 and F5N (narrow) foot stretchers (See picture) Rectangular flat plate F4 stiff and x-stiff foot stretchers Rectangular angled plate F4 foot stretchers
Related Products
Double T-Bolts
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher
Seat Chassis
Seat Chassis: Our seat chassis comes complete with two seat supports, four wheels, and two axles. Three seat support heights are available: low (1.8cm); medium (2.4cm); and high (3.4cm). The measurement is from the center of the axle to the … Read more
SRS Scull Sleeves
SRS Scull Sleeves: Schröder Rowing Service (SRS) Scull Sleeve used on Dreher Adjustable Length Sculls. This sleeve is bonded to the shaft with a epoxy based compound. To replace, simply remove the 10 screws and pry off. Leave the epoxy … Read more
Cylindrical Wing Nut
Cylindrical Wing Nut: From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place. Sold individually.
Seat Supports
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
Seat Tracks
Seat Tracks: Black anodized seat tracks from Martinoli. Available in two lengths: regular (33″) and long (36″). The tracks are supplied complete with 4 holding bolts and wing nuts. Priced per pair.
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher