Description
Cylindrical Wing Nut:
From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place.
Sold individually.
Cylindrical Wing Nut
$6.00 – $7.50
SKU: 03P66
Categories: Foot Stretchers & Shoes, Hardware
Tags: 316, cylindrical wing nut, foot-stretcher, foot-stretcher-hardware, Hardware, m6
You may also like…
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
F5 Foot Stretcher
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
Related Products
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
SRS Scull Sleeves
Priced per Pair.
Double Action Wheels and Axles
Double Action Wheels and Axles: The classic double action wheel and axle from Martinoli. Available in three sizes: 16.5 cm; 23 cm; and 28 cm. Priced per pair (four wheels and two axles).
Foot Stretcher Fittings
Foot Stretcher Fittings: The classic foot stretcher fittings made by Martinoli in Italy. Options available: Circle Wedge Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Tube End Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
