F4 Dreher Stiff and X-Stiff Twill Foot Stretcher: These models foot stretcher comes in three frame configurations (small, large 5-hole, large 7-hole), two-foot plate options (regular or angled) and two shoe plate widths (15 cm and 16 cm) and in the … Read more
F5 Foot Stretcher: Three-way adjustable. Available with or without foot plates. Compatible with BBGs, Resolutes, Dreher Rec-Racers and FISA 1xs. Not Included (click on hyperlinks below to purchase): Attachment fittings come in two styles (circle wedges and tube ends) and … Read more
Locking Wing Nuts: Black plastic locking wing nuts, metric size 6. Used to secure the foot stretcher in place. Optimal for travel. Sold in packs of 10. Please feel free to give us a call to discuss which attachment hardware … Read more
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Scull Handle Clamp: This item includes one scull handle clamp, complete with M5x15 hex-bolt and M5 washer. Assembly: To install, remove the old handle clamp from the oar. If the handle bolt became cross-threaded, then the bolt must be cut off … Read more
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
SRS Scull Sleeves: Schröder Rowing Service (SRS) Scull Sleeve used on Dreher Adjustable Length Sculls. This sleeve is bonded to the shaft with a epoxy based compound. To replace, simply remove the 10 screws and pry off. Leave the epoxy … Read more
