Description
M6 Stainless Steel Fender Washers.
Sold in packs of 10.
$6.50
Pack of 10 Fender Washers (M6).
M6 Stainless Steel Fender Washers.
Sold in packs of 10.
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
Pack of 10 Plastic Locking Wing Nuts.
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Cylindrical Wing Nut: From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place. Sold individually.
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Foot Stretcher Attachment Hardware: We have a variety of Metric size 6 nuts and washers: M6 Wing Nut (A4 / 316 Stainless Steel) – used on foot stretcher attachments (circle wedges and tube ends). M6 Black Plastic Locking Wing Nut … Read more
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
Dreher Carbon Seat (Complete): Our Dreher Carbon Seat comes completely assembled with a carbon seat top, two-seat supports, two axles, four ball-bearing wheels, and wheel attachment hardware. Two-seat top sizes are available: medium (29 cm width) and large (31 cm … Read more