Description
M6 Stainless Steel Flat Washers. Sold as pack of 100.
Sale!
100 M6 Flat Washers: Team Order
$15.00 Original price was: $15.00.$13.50Current price is: $13.50.
SKU: 03P70A-1
Category: Team Store
Tags: 316, A4, foot-stretcher, foot-stretcher-hardware, Hardware, m6, stainless
You may also like…
F5 Foot Stretcher
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Related Products
Seat Tops
Dreher Carbon Seat Tops come in two sizes: Medium: 29 cm wide, these carbon seat tops are sized to fit track widths of 16.5 cm to 23 cm. Each seat hole diameter is 2″, with the distance between the inside … Read more
Cylindrical Wing Nut
Cylindrical Wing Nut: From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place. Sold individually.
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Carriage Frames for Double Action Seats
Carriage Frames: The classic Nylon Carriage Frame for double action seats from Martinoli. Available in two sizes: 16.5 cm and 23 cm. For 28 cm widths, two 16.5 cm undercarriage frames are used.
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Seat Supports
Seat Supports: Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from the center of the axle to the top of the seat support where it attaches to the seat. … Read more
SRS Scull Collars
Priced per Pair.