Description
Tracks:
Anodized, black seat tracks. Long (36 in.) or short (33 in.) with attachment hardware.
Seat Tracks: Team Order
$126.00 – $265.20
Additional information
| Length | Set of 8 – Long 36 in., Set of 16 – Long 36 in., Set of 8 – Short 33 in., Set of 16 – Short 33 in. |
|---|
You may also like…
Seats Complete
Athletes have been using Dreher seats on their way to win countless Olympic and World Championship medals for the past three decades. We say “countless” because we honestly lost track at this point. While it is easy to overlook the … Read more
Dreher Rec-Racer 1x in Carbon
Rec-Racer I and II Carbon 1X: 2018 Rec-Racers Available: This lightweight, high performance, carbon construction, Rec-Racer comes In two sizes: Small Displacement Hull I and Large Displacement Hull II. Both are completely equipped with a hollow carbon rigger, carbon foot … Read more
Seat Tops
Athletes have been using Dreher seats on their way to win countless Olympic and World Championship medals for the past three decades. We say “countless” because we honestly lost track at this point. While it is easy to overlook the … Read more
NK StrokeCoach with Surge Rate and Bracket
StrokeCoach with Surge Rate and Bracket: The StrokeCoach you love, updated with 21st Century technology! The StrokeCoach with Surge Rate provides every StrokeCoach function – stroke rate, stroke count and elapsed time – with absolutely NO wiring or seat magnet required! … Read more
Related Products
Carbon Side Mounted Sweep Rigger
Carbon Side Mounted Sweep Rigger: With pins, without locks, without shims, unassembled, uncut to the exact dimensions. Price provided per each rigger. If the boat is present, we can quote on complete assembly to your rigging specification at $75.00/hour labor … Read more
Track End Stoppers
Track End Stoppers: For Martinoli seat tracks. Priced per pair.
Backstay Assembly
Backstay Assembly: For side mounted carbon tubular riggers. Assembly of back-stay tube, plug, knurled washer, pin, and threaded connector piece, aluminum black anodized bent arm, and hardware. The back stay tube is made from carbon fiber.
Flat Washers
M6 Stainless Steel Flat Washers. Sold in packs of 10. Please feel free to give us a call to discuss which attachment hardware options are appropriate for your specific foot stretcher. 603.659.7575.
Seat Supports
Seat Supports: (Height measured from the center line of the axle to where the seat support attaches to the bottom on the seat) Low ~ 1.8 cm medium ~ 2.4 cm high ~ 3.4 cm Seat supports come in two … Read more
Scull Handle Clamp
Scull Handle Clamp: This item includes one scull handle clamp, the M5x15 hex-bolt and M5 washer. Assembly: To install, remove the old handle clamp from the oar. If the handle bolt became cross-threaded, then the bolt must be cut off with a hack saw. … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 and F5N (narrow) foot stretchers (See picture) Rectangular flat plate F4 stiff and x-stiff foot stretchers Rectangular angled plate F4 foot stretchers
Stainless Steel Wing Nuts
M6 316 stainless steel wing nuts used to secure the foot stretcher in place. Sold in packs of 5. Please feel free to give us a call to discuss which attachment hardware options are appropriate for your specific foot stretcher. … Read more