Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
“Set Screw for BBG Fins” has been added to your cart. View cart
Thin Hex Nut
$4.00
Pack of 10 Thin Hex Nuts (M6).
SKU: 03P102
Category: Hardware
Tags: A4, f5 foot stretcher, foot-stretcher, m6, narrow hex head, shoe-plate, spacer, stainless, thin
You may also like…
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
F5 Foot Stretcher
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Related Products
Foot Stretcher Long Pieces
Foot Stretcher Long Pieces: The classic foot stretcher track made by Martinoli in Italy. Two options available: Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Note: Carbon keel slides found on some Dreher Foot Stretchers only … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Bow Numbers
Bow Numbers: A regatta standard for over 50 years, Coffey bow numbers are sturdy and long lasting. These premium quality placards measure 5″ x 8″ and fit securely into bow number clips. Every racer and coach should have a complete … Read more
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Carbon Fins For BBG 1xs and 2xs
Carbon Fins For BBG Singles and Doubles: Dreher Carbon Fins are designed to fit BBG singles and doubles. Available in two sizes (small and large) and two styles (the classic Parallelogram shape and the newer Sailboard shape).
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Set Screw for BBG Fins
Set Screw for BBG Fins: To be used with aluminum or carbon fins on BBG 1Xs or 2Xs.