Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
$4.00
Pack of 10 Thin Hex Nuts (M6).
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Bow Numbers: A regatta standard for over 50 years, Coffey bow numbers are sturdy and long lasting. These premium quality placards measure 5″ x 8″ and fit securely into bow number clips. Every racer and coach should have a complete … Read more
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher
Bow Ball: Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Dreher Seat Wheel Set: Compatible with Stämpfli/Janousek, Pocock, Hudson, Resolute, Empacher, Van Dusen, Fluidesign, BBG, Filippi, etc. We recommend changing all the wheels on a seat at the same time. Priced and sold as a set of 4 ball bearing wheels.
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more