Description
Rudders:
Martinoli Rudders for pairs, fours and eights.
Rudders
$38.50 – $45.40
Additional information
| Boat Type | Pair (M11), Four/Quad (M12), Eight (M12A) |
|---|
You may also like…
NK StrokeCoach with Surge Rate and Bracket
StrokeCoach with Surge Rate and Bracket: The StrokeCoach you love, updated with 21st Century technology! The StrokeCoach with Surge Rate provides every StrokeCoach function – stroke rate, stroke count and elapsed time – with absolutely NO wiring or seat magnet required! … Read more
Dreher Rec-Racer 1x in Carbon
Rec-Racer I and II Carbon 1X: 2018 Rec-Racers Available: This lightweight, high performance, carbon construction, Rec-Racer comes In two sizes: Small Displacement Hull I and Large Displacement Hull II. Both are completely equipped with a hollow carbon rigger, carbon foot … Read more
Prime, Paint and Clear-Coat Sculls
Prime, Paint and Clear-Coat Sculls: This is the price to prime, paint and clear-coat a set of sculls with your club or school background color. It is important to have a finish that is done professionally as flaking or pealing of the … Read more
Sculling SimulatOar
If you wish to purchase two of more units and / or connect two or more units together dynamically, then call for a quote.
Related Products
Thick Split Oar Lock Adjustment Spacers:
Thick Split Oar Lock Adjustment Spacers: These spacers can come in red, black or blue. Sold only in packs of ten and fits on 13mm pins. We cannot predict what color we have in stock at any one time.
Carbon Fins For BBG 1xs and 2xs
Carbon Fins For BBG 1xs and 2xs: Fins come in two sizes; small and large and two styles: Sailboard and Parallelogram
Scull Pin Assembly
Scull Pin Assembly: Short and Long 13 mm diameter pin assemblies with attachment hardware and adjustment spacers. For wing riggers or 3-stay or 4-stay riggers. Cannot be used on carbon tubular riggers. (Attachment hex nuts, lock washers, flat washers, thick removable spacers and fixed … Read more
Number Plate Holder
Number Plate Holder: For holding number plates to boat. Can be mounted permanently with drill, with velcro or tape.
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin, easy to adjust, base. M6x45, base … Read more
Heel Tie-Down Quick Release Snaps
Heel Tie-Down Quick Release Snaps: Hooks onto shoe heel loops to provide a quick entry and release of heel tie-downs attached to the bottom of foot stretchers. Sold in packs of 4.
Shoe Tie-Down Laces
Shoe Tie-Down Laces: Red or Black. Sold as a pair. For more foot stretcher parts and accessories click here.
Sweep Pin Assembly
Sweep Pin Assembly: 13 mm diameter sweep pin assembly. Included is all hardware (Hex nut, lock washers, flat washers, thick removal spacer, and thin spacers) excluding the scull lock. These pins are available on all riggers expect carbon tubular riggers … Read more