Dreher Black Seat Pad Description
Ruled Rigger Decal:
Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
“Dreher Black Seat Pad” has been added to your cart. View cart
Ruled Rigger Decal
$0.50
SKU: 04P54
Category: Carbon Riggers
Tags: carbon, decal, Dreher, measurement, rigger, ruler, sticker, tube rigger
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Related Products
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Carbon Rigger C-Cup
Carbon Rigger C-Cup: Dreher carbon “C” shaped oarlock holder, used with side mounted carbon tubular riggers. Oar lock, special pin and hardware are not included.
Replacement Sweep Blades
Sweep Blades: For traditional shaped shafts: Apex-55, Apex-52, Big Blade-52 For Slim Ellipse (elliptical shaped shafts): Apex-E Not sure which blade is right for your oar? Please provide the serial number and we will check our records.
Scull Pin Assembly
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Oar Lock Adjustment Spacers
Thin Oar Lock Adjustment Spacers: Make height changes with thin oarlock spacers. Sized for 13 mm pins. Sold in packs of twenty.
Carbon Tubular Rigger Pin with or without Hardware
Carbon Rigger Pin – Carbon Tubular Rigger Part: Specially designed for use with the Dreher carbon C-cup on the Carbon Tubular Riggers. The 13 mm diameter stainless steel pin can be ordered with or without the accompanying hardware: Carbon Tubular Rigger … Read more
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Carbon Backstay – Tube Only
Carbon Back-Stay Tube: Carbon backstay for Dreher side mounted carbon tubular riggers. Priced per backstay. Please provide length of tube.