Rigger Shims Description
Carbon Side-Stay – Tube Only:
Carbon sidestay for Dreher side mounted carbon tubular riggers.
Priced per sidestay. Please provide length of tube.
Carbon Sidestay Tube Only
$106.00
You may also like…
Carbon Side Mounted Sweep Rigger
Carbon Side Mounted Sweep Rigger: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components are uncut and unassembled. No boat shims are included. Price provided per rigger. The carbon “cup-shaped” oarlock … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). They are priced per side-stay assembly. Please provide the … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Related Products
Backstay Only
Carbon Back-Stay – Tube Only: Carbon backstay for Dreher side mounted carbon tubular riggers. Priced per backstay. Please provide length of tube.
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can … Read more
Hex Head Bolt
Hex Head Bolt: Sold in packs of 5. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Scull Pin Assembly
Scull Pin Assembly: Machined from a solid piece of 316 stainless steel, our scull pins are 13 mm in diameter and come in two ‘below the shoulder’ lengths. The Short Pin has 3 cm below the shoulder with 2.5 cm … Read more
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. Pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
C2 Sweep Oarlock
Concept2 Sweep Oarlock: Blue metric pitch bushings included. Sold individually.
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher