Carbon Sidestay - Tube Only Description
Carbon Back-Stay Tube:
Carbon backstay for Dreher side mounted carbon tubular riggers.
Priced per backstay. Please provide length of tube.
“Carbon Sidestay – Tube Only” has been added to your cart. View cart
Carbon Backstay – Tube Only
$85.50
You may also like…
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Related Products
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher
Carbon Boat Attachment Piece for Mounting Rigger
Carbon Boat Attachment Piece (BAP) – Carbon Tubular Rigger Part: Carbon side stay attachment for mounting rigger to racing shell. The Boat Attachment Piece (BAP) is epoxied into the end of a side stay. This part comes in several different sizes … Read more
Oar Lock Adjustment Spacers
Thin Oar Lock Adjustment Spacers: Make height changes with thin oarlock spacers. Sized for 13 mm pins. Sold in packs of twenty.
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Carbon Tubular Rigger Pin with or without Hardware
Carbon Rigger Pin – Carbon Tubular Rigger Part: Specially designed for use with the Dreher carbon C-cup on the Carbon Tubular Riggers. The 13 mm diameter stainless steel pin can be ordered with or without the accompanying hardware: Carbon Tubular Rigger … Read more