Description
Slotted Reinforcement – Carbon Tubular Rigger Part:
Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Slotted Reinforcement
$2.65
You may also like…
Slotted Interface for Carbon Tubular Rigger
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Related Products
Carbon Wing Rigger Boat Attachment Pieces
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger: Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Double T-Bolts
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher
Carbon Backstay – Tube Only
Carbon Back-Stay Tube: Carbon backstay for Dreher side mounted carbon tubular riggers. Priced per backstay. Please provide length of tube.
Pitch Meter
Pitch Meter: Unique pitch meter measures catch and finish angles, as well as lateral and outward pitch.
Scull Pin Assembly
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Carbon Rigger C-Cup
Carbon Rigger C-Cup: Dreher carbon “C” shaped oarlock holder, used with side mounted carbon tubular riggers. Oar lock, special pin and hardware are not included.
Ruled Rigger Decal
Ruled Rigger Decal: Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.