Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
Thin Hex Nut
$4.00
Pack of 10 Thin Hex Nuts (M6).
SKU: 03P102
Category: Hardware
Tags: A4, f5 foot stretcher, foot-stretcher, m6, narrow hex head, shoe-plate, spacer, stainless, thin
You may also like…
F5 Foot Stretcher
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Related Products
Foot Stretcher Attachment Hardware
Foot Stretcher Attachment Hardware: We have a variety of Metric size 6 nuts and washers: M6 Wing Nut (A4 / 316 Stainless Steel) – used on foot stretcher attachments (circle wedges and tube ends). M6 Black Plastic Locking Wing Nut … Read more
Bow Ball
Bow Ball: Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.
Scull Pin Assembly
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Drain Plugs
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Foot Stretcher Long Pieces
Foot Stretcher Long Pieces: The classic foot stretcher track made by Martinoli in Italy. Two options available: Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Note: Carbon keel slides found on some Dreher Foot Stretchers only … Read more
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Martinoli Fin for Singles and Doubles
Single and Double Nylon Fins: Martinoli nylon fin for singles and doubles. Will fit our Rec-Racers and FISA Singles.