Description
Slotted Reinforcement – Carbon Tubular Rigger Part:
Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
“Ruled Rigger Decal” has been added to your cart. View cart
Slotted Reinforcement
$2.65
You may also like…
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Slotted Interface for Carbon Tubular Rigger
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Related Products
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Bent Arm Tubular Rigger Part
Bent Arm – Tubular Carbon Rigger Part: The Bent Arm is a black anodized threaded piece that inserts into the Delrin bushing of the backstay. The threading allows for length adjustments. The other end has two holes, offering a choice … Read more
Carbon Wing Rigger Boat Attachment Pieces
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger: Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.
Hex Head Bolt
Hex Head Bolt: Sold in packs of 4. For attaching the scull pin to the C-Cup of the carbon tubular sculling rigger. With a counter sunk dimple in the head, the hex bolt is attached on each end of the pin allowing … Read more
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Ruled Rigger Decal
Ruled Rigger Decal: Measurement of spread/span in centimeters for use on Dreher Carbon Tubular Riggers and Dreher Carbon Wing Riggers.
