Martinoli grips are a synthetic rubber with a knurled finish that fit any handle size. Martinoli grips are available in six colors: Red, Orange, Yellow, Green, Blue, and Black.
Additional information
Weight
1 lbs
Grip Color & Quantity
Red – 4 Pair, Red – 8 Pair, Orange – 4 Pair, Orange – 8 Pair, Yellow – 4 Pair, Yellow – 8 Pair, Green – 4 Pair, Green – 8 Pair, Blue – 4 Pair, Blue – 8 Pair, Black – 4 Pair, Black – 8 Pair
Row-Wik Scull Grip Wrap: Row-Wik is easy to wrap, performs well in dry, humid, rainy and cold weather. Most importantly, it is easy on the hands. It has a subtle textured surface that wicks away moisture and provides a good … Read more
Scull Handle: Carbon scull handles for Dreher Adjustable Length Sculls. Available in three sizes: Small (bare handle diameter 2.8 cm); Medium (bare handle diameter 3.0 cm); and Large (bare handle diameter 3.2 cm). With Martinoli synthetic rubber grips, the handle … Read more
Stämpfli Sculling Grips: Stämpfli Grips have been used by scullers worldwide for decades and surely rank as one of the most popular choices for grips. The grips are made of natural rubber and have a knurled diamond cross-hatch pattern resulting … Read more
For customers looking for the best-in-class slides (tracks) for their boat, than look no further than Carl Douglas’ AussieRail™ Slides. These slides are hard-anodized for longevity and complete with smooth no-bite ends to prevent “slide bite”; extra comfort and reduced risk … Read more
Dreher Carbon Sweep Handles: Carbon Sweep Handles for Apex-52, Apex-55 and BB-52 Sweep Oars. Choice of small (3.7 cm diameter) or medium (4.0 cm diameter). Available with or without grip: Row-Wik – a sweat-wicking grip wrap in red, blue, or … Read more
Dreher High-Performance Sculls: Built with a combination of high modulus carbon internally and twill carbon on the exterior, these sculls are both strong and light. The 100% carbon sculls come with multiple options including three blade shapes; two levels of … Read more
Large Nylon Drain Ports: Classic two-part hard nylon drain ports made by Martinoli in Italy. Consists of an outer ring that is fixed to the boat deck and a removable inner hatch cover. Used on Dreher Rec-Racers and FISA singles. … Read more
SRS Scull Sleeves: Schröder Rowing Service (SRS) Scull Sleeve used on Dreher Adjustable Length Sculls. This sleeve is bonded to the shaft with a epoxy based compound. To replace, simply remove the 10 screws and pry off. Leave the epoxy … Read more
Overgrip: Five-roll pack special of your choice of Overgrip colors. Grip wrap can be applied over any scull or sweep handle to personalize and add comfort. The wrap sticks to itself but does not leave a residue. It keeps your … Read more
For a look at Elliptical Shaft compatible blade shape versus other blades that are made for round shafts that we sell, see the Sculling Oar Blade Geometry Link.
For more information on the “tool-free” Adjustment feature with a locking latch (see the last picture in gallery):
This “tool-free” load adjustment feature allows anyone to adjust the load anytime and anywhere without tools. The carbon segmented screw piece is permanently bonded to the scull shaft. The easily replaceable bearing surface is moved by a nut, with 1 cm of inboard/outboard movement for every 360 degrees turn of the nut. This easy adjustment feature allows the rower to have a better feel for which rig is correct for each wind condition. A change of the rig takes no more than one to two to three minutes to complete the four adjustments required for each set of sculls and can be accomplished easily on-the-water or on the dock. Each oar has a locking latch that also helps rotate the nut the is used to change the outboard.
$234.00 – $468.00
Select options
