F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
Double Action Wheels and Axles: The classic double action wheel and axle from Martinoli. Available in three sizes: 16.5 cm; 23 cm; and 28 cm. Priced per pair (four wheels and two axles).
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Cylindrical Wing Nut: From Martinoli in Italy, the metric size 6 Stainless Steel Cylindrical Wing Nut is available in two lengths: 40 mm and 60 mm. Used to secure the foot stretcher in place. Sold individually.
Seat Tracks: Black anodized seat tracks from Martinoli. Available in two lengths: regular (33″) and long (36″). The tracks are supplied complete with 4 holding bolts and wing nuts. Priced per pair.
SRS Scull Sleeves: Schröder Rowing Service (SRS) Scull Sleeve used on Dreher Adjustable Length Sculls. This sleeve is bonded to the shaft with a epoxy based compound. To replace, simply remove the 10 screws and pry off. Leave the epoxy … Read more
