Description
Carbon Back-Stay Tube:
Carbon backstay for Dreher side mounted carbon tubular riggers.
Priced per backstay. Please provide length of tube.
Carbon Backstay – Tube Only
$85.50
You may also like…
Carbon Side Mounted Sculling Riggers
Carbon Side Mounted Sculling Riggers: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, back stay assembly, oarlock and pin. Sold as a pair. The rigger components are uncut and unassembled. No boat shims are included. The carbon “cup … Read more
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Carbon Side Mounted Sweep Rigger Assembled
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Related Products
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Carbon Tubular Rigger Pin with or without Hardware
Carbon Rigger Pin – Carbon Tubular Rigger Part: Specially designed for use with the Dreher carbon C-cup on the Carbon Tubular Riggers. The 13 mm diameter stainless steel pin can be ordered with or without the accompanying hardware: Carbon Tubular Rigger … Read more
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.
Replacement Sweep Blades
Sweep Blades: For traditional shaped shafts: Apex-55, Apex-52, Big Blade-52 For Slim Ellipse (elliptical shaped shafts): Apex-E Not sure which blade is right for your oar? Please provide the serial number and we will check our records.
Decals for Sweeps
Decals for Sweep Oars: Handle Decal (363 cm – 383 cm, 143″ – 151″) Sleeve Decal (250 cm – 268 cm, 98″ – 105″) Dreher Reflective Decal
Bent Arm Tubular Rigger Part
Bent Arm – Tubular Carbon Rigger Part: The Bent Arm is a black anodized threaded piece that inserts into the Delrin bushing of the backstay. The threading allows for length adjustments. The other end has two holes, offering a choice … Read more
Seat Chassis
Seat Chassis: Our seat chassis comes completely assembled with two seat supports, four wheels, two axles, and wheel attachment hardware. Three seat support heights are available: low (1.8 cm); medium (2.4 cm); and high (3.4 cm). The measurement is from … Read more
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.