Description
Slotted Reinforcement – Carbon Tubular Rigger Part:
Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
$2.65
Slotted Reinforcement – Carbon Tubular Rigger Part:
Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
Slotted Interface (RC-7) – Carbon Tubular Rigger Part: The carbon slotted interface (also known as “RC-7”) connects the side stay with the back stay. The slot allows for changes in spread. This part is epoxied into the end of a … Read more
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
Carbon Side Mounted Sweep Rigger Assembled: Dreher ultra-stiff carbon tubular riggers complete with side stay assembly, backstay assembly, oarlock, and pin. The rigger components made to the boat. Boat shims will be included. Price provided per rigger. The carbon “cup-shaped” … Read more
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger: Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.
NK EmPower Adapter Kit for Empacher Two Stay Riggers: Scullers with a bow mounted wing or carbon two-stay rigger that wish to use NK’s EmPower oarlock will need to upgrade the C-Cup on the rigger. Luckily, we have just the … Read more
Carbon Rigger Pin – Carbon Tubular Rigger Part: Specially designed for use with the Dreher carbon C-cup on the Carbon Tubular Riggers. The 13 mm diameter stainless steel pin can be ordered with or without the accompanying hardware: Carbon Tubular Rigger … Read more
Pitch Meter: Unique pitch meter measures catch and finish angles, as well as lateral and outward pitch.
Priced per Pair. For 13mm Pins.