Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
Thin Hex Nut
$4.00
Pack of 10 Thin Hex Nuts (M6).
SKU: 03P102
Category: Hardware
Tags: A4, f5 foot stretcher, foot-stretcher, m6, narrow hex head, shoe-plate, spacer, stainless, thin
You may also like…
F4 Dreher Stiff Twill Foot Stretcher
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
F5 Foot Stretcher
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
Foot Plate for Dreher Carbon Foot Stretchers
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
Related Products
Seat Tracks
Priced per Pair.
Bow Numbers
Bow Numbers: A regatta standard for over 50 years, Coffey bow numbers are sturdy and long lasting. These premium quality placards measure 5″ x 8″ and fit securely into bow number clips. Every racer and coach should have a complete … Read more
Martinoli Sculling Grips
Martinoli Grips: Martinoli grips are a synthetic rubber with a knurled finish that fit any handle size. Available in six colors: Red, Green, Blue, Yellow, Light Orange, and Black. Price per pair. If you would like to purchase multiple pairs in … Read more
Foot Stretcher Long Pieces
Foot Stretcher Long Pieces: The classic foot stretcher track made by Martinoli in Italy. Two options available: Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Note: Carbon keel slides found on some Dreher Foot Stretchers only … Read more
Large Nylon Drain Ports
Large Nylon Drain Ports: Classic two-part hard nylon drain ports made by Martinoli in Italy. Consists of an outer ring that is fixed to the boat deck and a removable inner hatch cover. Used on Dreher Rec-Racers and FISA singles. … Read more
Stämpfli Sculling Grips
Stämpfli Sculling Grips: Stämpfli Grips have been used by scullers worldwide for decades and surely rank as one of the most popular choices for grips. The grips are made of natural rubber and have a knurled diamond cross-hatch pattern resulting … Read more
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.
Foot Stretcher Attachment Hardware
Foot Stretcher Attachment Hardware: We have a variety of Metric size 6 nuts and washers: M6 Wing Nut (A4 / 316 Stainless Steel) – used on foot stretcher attachments (circle wedges and tube ends). M6 Black Plastic Locking Wing Nut … Read more