Description
Boat Attachment Pieces for the Stern Mounted Hollow Carbon Wing Rigger:
Also called “Z” Risers, the boat attachment pieces for the Carbon Wing Rigger used on FISA singles and Rec Racers come in two heights.
Carbon Wing Rigger Boat Attachment Pieces
$70.00 – $80.00Price range: $70.00 through $80.00
SKU: 04A05-1
Category: Carbon Riggers
Tags: boat, carbon, carbon-rigger, FISA, hollow-wing-rigger, long pin, Rec-Racer, rowing, scull lock, single, stern mounted, wing-rigger
You may also like…
Dreher Alpha Sculls
Alpha Blade Sculls with Tool Free Adjustment: These sculls feature our unique Alpha Blade and are equipped with our revolutionary Tool-Free Adjustment. The Alpha blade has more curve from top to bottom and from tip to tail, with the … Read more
Dreher Elliptical Sculls
For a look at Elliptical Shaft compatible blade shape versus other blades that are made for round shafts that we sell, see the Sculling Oar Blade Geometry Link.
Related Products
Scull Handles
Priced per Handle.
Backstay Assembly
Backstay Assembly: Carbon backstay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon back-stay tube: anodized plug; knurled washer; threaded Delrin connector piece; anodized bent arm and nut; carbon angled PITA; and hardware. Priced per backstay assembly. Please provide length … Read more
Stern Mounted Hollow Carbon Wing Rigger
Stern Mounted Hollow Carbon Wing Rigger: The carbon top-mounted hollow wing was introduced in the Fall of 2014. This stiff rigger has a lightweight aerodynamic foil shape with a cutaway section over the foot stretcher. The hollow wing can be … Read more
Bow Tie for Foot Stretcher
Bow Ties for Foot Stretcher: 1.0 or 1.5 cm bow ties for F4 Dreher Stiff Twill Foot Stretcher
Slotted Reinforcement
Slotted Reinforcement – Carbon Tubular Rigger Part: Stainless steel slotted reinforcement piece that sets into the carbon slotted interface (“RC-7”) on the side-stay of the Dreher Carbon Tubular Rigger.
NK EmPower Adapter Kit
NK EmPower Adapter Kit for Empacher Two Stay Riggers: Scullers with a bow mounted wing or carbon two-stay rigger that wish to use NK’s EmPower oarlock will need to upgrade the C-Cup on the rigger. Luckily, we have just the … Read more
Sidestay Assembly
Sidestay Assembly: Carbon side-stay assembly for Dreher side mounted carbon tubular riggers. Complete assembly of carbon side-stay tube: carbon Boat Attachment Piece (BAP); carbon Rigger Connector (RC-7); and hardware (slot reinforcement and clip). Priced per side-stay assembly. Please provide the length of … Read more
C-Cup Rigger Pitch Meter
Carbon Pitch Meter: For carbon tubular riggers (side or top mounted). Requires a pin with M8 x 20 mm dimpled hex bolts and with zero degree outboard pitch.