Description
Bow Ball:
Required equipment per USRowing’s Rules of Rowing, make sure you have a bow ball on your boat and another in your toolbox. From Schröder Rowing Service, this white bow ball is essential to protect against puncture injuries.
Bow Ball
$10.00
Available on backorder
You may also like…
Bow Numbers
Bow Numbers: A regatta standard for over 50 years, Coffey bow numbers are sturdy and long lasting. These premium quality placards measure 5″ x 8″ and fit securely into bow number clips. Every racer and coach should have a complete … Read more
Related Products
Double T-Bolts
Stainless Steel Double T-Bolts: –M6x35 for the F5 Foot Stretcher –M6x45 for the F4 Extra Stiff Foot Stretcher
T-Bolts for Foot Stretcher
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) M6x45, base width 12mm (for circle wedges) M6x55, … Read more
Martinoli Fin for Singles and Doubles
Single and Double Nylon Fins: Martinoli nylon fin for singles and doubles. Will fit our Rec-Racers and FISA Singles.
Foot Stretcher Long Pieces
Foot Stretcher Long Pieces: The classic foot stretcher track made by Martinoli in Italy. Two options available: Large tooth – castle shaped _∏_∏_∏_ Sharp tooth – saw tooth /\/\/\/\/\ Note: Carbon keel slides found on some Dreher Foot Stretchers only … Read more
Sweep Pin Assembly
Sweep Pin Assembly: Machined from a solid piece of 316 stainless steel, our sweep pins are 13 mm in diameter. Hardware is included: hex nuts, lock nuts, washers, thick split height spacers, and thin spacers. These pins can be used … Read more
Rigger Shims
Rigger Shims: Plastic rigger shims from Martinoli. One pack of 5 shims: 0; 0.5; 1; 1.5; and 2 degrees. Various shim sizes can be stacked to achieve correct height.