The Ultra Stiff Carbon Tubular Riggers are equipped with a carbon "cup shaped" oarlock holder that directs all the force during the drive straight down the centerline of the carbon rigger back support of the two stay rigger system. There is no twist of the oarlock during the drive.
Thus, the propelling forces, especially from the "catch" to the "stroke perpendicular", are translated through this concentric design to maximize boat speed and to minimize force dissipation through rigger flexing.
Availability: Custom designed to fit most current models of rowing shells. Presently, you see Dreher riggers on many high end Resolute 8+ (all three sizes) and 4+ with nearly all singles being equipped with top mounted Dreher Riggers. BBG top end Olympia and Olympia X Shells sold in Europe have either the side or top mounted Dreher riggers. All BBGs Olympias sold in NA are outfitted with the Dreher Riggers. (See below a top mounted carbon rigger on an Olympia X 1x and then a side mounted carbon tubular rigger on a BBG Olympia 2x.
In 2005 Dreher Riggers were used on the Women's 8+ that won the gold at Jr. Worlds. In 2003-2004 Dreher Carbon riggers were used on the BBG Olympia X Single by the sculler from Germany who won a bronze medal in the 2003 World Championships and also by the top US Sculler that year. In 2004 the German won the World Cup in Lucerne World Cup and the Gold Medal at World Rowing Championships using the BBG Olympia X with Dreher rigging. There were also several crews using Dreher rigging at the Olympics on BBGs.
Ordering Information for Riggers
Click on the  icon to add an item to your shopping cart.
| Item |
Description |
Price |
|
| 04A01 |
CARBON RIGGER - SCULLING (SET); SIDE MOUNTED W/O LOCKS * |
$795.00 |
|
| 04A03 |
CARBON RIGGER - SWEEP SIDE MOUNT W/O LOCKS * |
$397.50 |
|
| 04A05 |
CARBON WING W/O LOCKS * |
$477.00 |
|
| 04A06 |
CARBON SW. CANT WING 2 STAY RIGGER WITH C-CUP ** |
$395.50 |
|
| 04A11 |
CARBON RIGGER SIDE STAY ASSEMBLY (RC-7, SIDE STAY & BAP) * |
$155.00 |
|
| 04M21 |
CARBON RIGGER SIDE STAY, TUBE ONLY * |
$65.00 |
|
| 04M22 |
CARBON RIGGER BAPS (SIDE MOUNT) |
$48.50 |
|
| 04M26 |
CARBON BACK STAY ASSEMBLY (SIDE MOUNT) (TUBE; PLUG, K.WASH., PIN ASSEM., HW, AL-BAPS) * |
$238.50 |
|
| 04M28 |
CARBON RIGGER SLOTTED INTERFACE - SIDE STAY (RC-7) * |
$43.00 |
|
| 04M33 |
CARBON RIGGER SHIMS (+/-1 THROUGH 4 DEGREES) * |
$8.50 |
|
| 04M34 |
SLOTTED REINFORCEMENT/ SS * |
$2.65 |
|
| 04M41 |
CARBON RIGGER BACK STAY * |
$85.50 |
|
| 04M43 |
CARBON RIGGER C-CUP * |
$48.50 |
|
| 04M48 |
SIDE STAY ASSEMBLY (TUBE, BAP, SHIM, RC-7, HW) * |
$156.50 |
|
| 04P54 |
RULED RIGGER DECAL |
$0.50 |
|
| 04P55 |
DREHER DECAL |
$0.75 |
|
| 04P56 |
RIGGER BENT ARM AL-BLACK ANODIZED |
$32.50 |
|
| 04P57 |
RIGGER BLACK ANODIZED PLUG |
$40.00 |
|
| 04P58 |
KNURLED WASHER |
$20.00 |
|
| 04P61 |
M56 SCULL LOCK-PITCH BUSHINGS (INCL) |
$13.00 |
|
| 04P71 |
M55 SWEEP OARLOCK WITH PITCH BUSHINGS (INCL.) |
$13.50 |
|
| 04P810 |
SWEEP PIN ASSEMBLY (13 MM) |
$34.50 |
|
| 04P811 |
SCULL PIN ASSEMBLY - SHORT (13 MM) |
$27.50 |
|
| 04P812 |
SCULL PIN ASSEMBLY - LONG (13 MM) |
$29.50 |
|
| 04P85 |
SS HEX HEAD BOLT FOR C-RIGGER ATTACHMENT; COUNTER SUNK DIMPLE |
$1.75 |
|
| 04P899 |
MAGIK MK-1 EVOLUTION SWEEP LOCK (EACH) |
$49.00 |
|
| 04P900 |
MAGIK MK-1 EVOLUTION SCULL LOCKS (PER SET PRICE) |
$94.00 |
|
| 08A13 |
RIGGER TRAVEL BAG - TUBULAR |
$60.00 |
|
| 08A26 |
CARBON RIGGER-PITCH METER |
$70.00 |
|
|
Prices current as of
September 5, 2008 |
|
