Description
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
$4.00
Pack of 10 Thin Hex Nuts (M6).
M6 Stainless Steel Thin Hex Nut.
Narrow 3.2 mm high nut used as spacer between the football foot plate and the F5 foot stretcher.
Sold in packs of 10.
Foot Plate for Dreher Carbon Foot Stretchers: Football plate for F5 Foot Stretcher (15 cm shoe spacing) Rectangular flat plate F4 Foot Stretcher (15 cm shoe spacing) Rectangular angled plate F4 Foot Stretcher (15 cm and 16 cm shoe spacing)
F5 Dreher Carbon Twill Foot Stretcher: The F5 Foot Stretcher is light, stiff and can be used with or without a foot plate. Shoes can be mounted directly to the frame or fitted on the Football Foot Plate (which attaches … Read more
F4 Dreher Stiff Twill Foot Stretcher: The F4 foot stretcher comes in three frame sizes (small 4-hole, large 5-hole, large 7-hole) and three foot plate options (flat 15 cm, angled 15 cm or angled 16 cm). The foot stretcher comes … Read more
BBG Hatch Cover: 4 inch, nylon **only fits on a BBG hull.
Stainless Steel T-Bolts (316) for Foot Stretcher: See comparison image for relative differences in base thickness and thread height. M6x25, base width 12mm (for tube ends) M6x35, base width 12mm (for tube ends) – Thin base, easy to adjust. M6x45, base … Read more
Drain Plugs: Made by Martinoli in Italy. Flexible rubber drain plugs fit into openings in the boat deck. The small nylon drain plug is made to be fixed to the hull. The plug is attached to the base — easy … Read more
Shoe Tie-Down Laces: Required equipment as per USRowing’s Rules of Racing. If you flip a boat, you need to be able to pull your feet out of the shoes. The shoe heel needs to move for rowing, but have strong … Read more
BBG Aluminum Fin: For BBG 1Xs or 2Xs.
Stämpfli Sculling Grips: Stämpfli Grips have been used by scullers worldwide for decades and surely rank as one of the most popular choices for grips. The grips are made of natural rubber and have a knurled diamond cross-hatch pattern resulting … Read more
Priced per Pin. Complete with Attachment Hardware and Height Spacers.
Dreher Seat Wheel Set: Compatible with Stämpfli/Janousek, Pocock, Hudson, Resolute, Empacher, Van Dusen, Fluidesign, BBG, Filippi, etc. We recommend changing all the wheels on a seat at the same time. Priced and sold as a set of 4 ball bearing wheels.