Dreher Carbon Tubular Adjustable Carbon Foot Stretchers:
The Dreher Adjustable Carbon Tubular Foot stretcher Assembly has been used in many top competition boat for over 10 years. It is can be custom fit to almost any sculling or sweep boat from a single to an eight.
The foot plate on which the shoes are attached is easily removable from the boat, so you can easily take you shoes and foot plate out of the boat when not in use. In a crew boat you can quickly move your shoes from seat to seat, when the coach decides to change the boating. This means no more shoes that are too big or shoes that are too small. The correct size shoe provides more control at the finish when your feet need to be firmly attached to the boat.
The carbon foot stretcher consists of two parts: The cross bar and heal plate assembly or "frame" and footplate with shoes attached. By simply loosening one thumb screw, the footplate with shoes attached is easily removable from the cross bar. This quick disconnect feature allows easy shoe removal (i.e., shoes and footplate together) and can be changed from boat to boat and seat to seat. The tube within a tube (heel plate assembly into cross bar) is adjustable for length, height and angle (35 to 45 degrees). A decal shows the angle of the foot plate at each adjustment position.
An extra wide foot board was designed in 2001 to provide a greater range of shoe placement on the board, upgraded in 2003 with a more secure clamping system and a bent foot board offered in 2004. The new foot plate for 2004 has been designed to offer several of the new features of the 2004 Foot Stretcher. The steeper toe angle promotes better connection at the finish, while also providing greater stiffness of the foot plate.
Ordering Instructions for Footstretchers
Click on the  icon to add an item to your shopping cart.
| Item |
Description |
Price |
|
| 03A01 |
CARBON TUBULAR FOOT STRETCHERS WITHOUT SHOES ** |
$210.00 |
|
| 03A04 |
CARBON 2004 X-STIFF TWILL FTSTR WITH FTPLATE, REINFORCED KEEL ** |
$222.50 |
|
| 03A11 |
2005 FOOT STRETCHER; W/O PLATE AND W/O SHOES ** |
$142.70 |
|
| 03M21 |
CARBON FOOT STR FOOT PLATE - TUBULAR, 2004 (FLAT OR ANGLED, 15 OR 16 CM) OR 2005 * |
$50.50 |
|
| 03M30 |
CARBON KEEL SHIMS (1.0 OR 1.5 CM) * |
$8.50 |
|
| 03M33 |
CARBON NEW WAVE FT. PLATE (SHOE DISTANCE CTR TO CTR) * |
$54.00 |
|
| 03M33A |
NEW WAVE FIXING DISC (1 SET) FOR ATTACHING NEW WAVE SHOES TO THE FOOT PLATE * |
$46.00 |
|
| 03M39 |
BOW TIE - 1.0 OR 1.5 CM FOR 03A16 * |
$13.50 |
|
| 03P31 |
FOOT STRETCHER LONG PIECE - SHARP TOOTH |
$4.30 |
|
| 03P33 |
M36B FT STR CIRCLE WEDGE-SHARP TOOTH |
$2.75 |
|
| 03P34 |
M36D FT STR TUBE END-SHARP TOOTH |
$2.75 |
|
| 03P40 |
FOOT STRETCHER LONG PIECE - LG. TOOTH |
$4.30 |
|
| 03P43 |
M36C FT STR CIRCLE WEDGE-CASTLE TOOTH |
$2.75 |
|
| 03P44 |
M58A FT STR TUBE END WEDGE-CASTLE TOOTH |
$2.75 |
|
| 03P55 |
ROWING SHOES BY ANKAA: (NON-BULK ORDER) * |
$85.00 |
|
| 03P56 |
1 PR OF SHOE TIE-DOWN LACES |
$3.50 |
|
| 03P58 |
TIE-DOWN SNAP |
$0.55 |
|
| 03P60 |
NEW WAVE ROWING SHOES (SELECT ONE SIZE HIGHER THAN SHOE SIZE) |
$152.00 |
|
| 03P60A |
BULK SHOE (8 PR MIN. DROP SHIPPED FROM FACTORY) * |
$49.00 |
|
| 03P61 |
SHORT T BOLT M6X26MM HIGH RECT. WIDTH = 12 MM |
$3.85 |
|
| 03P62 |
MED. FT STR T BOLT 6X40MM RECT. HEAD |
$3.90 |
|
| 03P63 |
LONG T BOLT M6X50MM HIGH RECT. WIDTH = 12 MM |
$3.99 |
|
| 03P65 |
LONG FT STR T BOLT 6X60 MM RECT. |
$3.70 |
|
| 03P70A |
M6 WING NUT W/ WASHER |
$1.35 |
|
| 03P90 |
DOUBLE SS T BOLT * |
$7.75 |
|
| 03P91 |
MACHINED NYLON FTSTR. BOTTOM PIECE (SET) |
$10.00 |
|
| 03P92 |
EXTRA LONG KEEL AL - BLACK ANODIZED KEEL FITTING |
$7.25 |
|
|
Prices current as of
September 5, 2008 |
|
