• Dreher Carbon Seats: Medium (left) and Large (Right) with single action undercarriages. The seats are made in two seat top sizes and have three seat support heights. The standard track widths are: 16.5cm, 18cm, 23cm, 28cm and 30cm. Custom axle widths can be done as well. Also, shown is the Dreher single action wheel (see below). This wheel has a double rubber stainless sealed bearing that is designed to operate in a salt-water environment. Also, the material used to made the tire is wear resistant and dimensionally stable in humid environments, which makes for a tighter fit of the bearing and longer wheel life.

Dreher Carbon Seats

• Dreher Carbon Riggers: Dreher Manufacture's 4 different styles of carbon riggers: Side Mounted Tubular, Top Mounted Tubular, Carbon Wing and the Canilever Wing (shown below) with a carbon tubular backstay. For more information and pictures of our the Dreher Carbon Riggers, please follow the link below:

Dreher Carbon Riggers

• Dreher Carbon Foot Stretchers: Dreher Manufacture's about 6 different styles of foot stretchers. Several styles of shoe plates are provided for the different type of foot stretcher frames. The only styles shown below are the 2004 Foot Stretcher with the flat shoe plates (top left) and the 2007 Foot Stretcher (top right). Not shown, is the same 2004 Foot Stretcher with an angled plate or in the smaller sized foot frame. The 2007 style foot stretcher is used with a common Bakelite shoe plate (supplied by others). In contrast is the final foot stretcher shown: The CX style Foot Stretcher (bottom) that is equipped with a molded in hole pattern for direct shoe attachment or the shoes can be attached to either the Dreher "Football" or the Dreher "New Wave" Style Shoe Plates for greater ease of shoe height adjustment. For more information on our the Dreher Foot Stretchers, please follow the link below;

Dreher Carbon Foot Stretchers

• Dreher Carbon Fins and Rudders: See the carbon parallelogram and sailboard style fin made for BBG singles in two sizes. Also, not shown are carbon fins and rudders made for pairs, 4x/4-s and 8+s.

• Pitch meter: A great tool for any athlete or coaches tool box.

• New Rigger Bags with extra padding Dreher Carbon Riggers (2 side mounted riggers per bag): A excellent method of protect the carbon riggers during travel.

• Full Length Oar Bags (padded {9' 10"} and unpadded) for Sculls: An excellent way to protect your sculls during travel or during storage.(shown below is the unpadded). The padded oar bag is royal blue with a full length-zipper and a shoulder strap. Both bags have a divider in the blade area to further protect the blades.

• The new "Row-Wik" grip wrap has replaced the "Synthetic Suede" as a grip wrap for sculls and sweeps: This new grip wrap is easy on the hands, has a little more padding than the "Synthetic Suede" had, is great in humid/rainy conditions and cleans up easily. Installation is easier then the "Synthetic Suede" so you do not have to have a lot of skill to have to wrap the scull or sweep handles well. It can be used on any brand of sweeps or sculls. The new grip wrap also has good insulating properties in cold weather and your hands will warm up quickly. The "Row-Wik" grip wrap colors available are: Bright red, bright yellow, royal blue and black. See below for colors available:

• PVC Slings for 1xs or 2xs: Regular height or Shorties as shown below.

Hardware & Travel accessories price list

• Company Gear - "DREHER" Short and Long Sleeve "T" Shirts: 100% pre-shrunk cotton, heavy weight, white "T" shirts with silk screened logo's in navy blue and red (front and large logo on back) in small, medium, large and x-large.

• Company Gear - "DREHER" Hats: Popular HeadSweat washable hats (red, white and blue) embroidered logos (front and back). One size fits all.

Rowing clothing price list